Back to Previous Page
Videos and Images


Wimberley Toolholder Videos

How to Sharpen the Tool Bit for the Wimberley Toolholder and a
Demonstration of Using the Toolholder to Machine a Steel Bar (Part I)


How to Sharpen the Tool Bit for the Wimberley Toolholder and a
Demonstration of Using the Toolholder to Machine a Steel Bar (Part II)




Wimberley Toolholder Images

high speed steel lathe tool holder in use high speed steel lathe tool holder in use
Turning with a positive 45 degree lead angle.
Material: Hot rolled steel
Diameter of Material: 3/4"
Spindle Speed: 410 RPM
Feed Rate: .0062" per revolution
Depth of Cut: .030" (radius)
 

Facing with a positive 45 degree lead angle.
Material: Hot rolled steel
Diameter of Material: 3/4"
Spindle Speed: 410 RPM
Feed Rate: .0042" per revolution
Depth of Cut: .050" (radius)

high speed steel lathe tool holder in use high speed steel lathe tool holder in use
Turning with a negative 5 degree lead angle.
Material: Hot rolled steel
Diameter of Material: 3/4"
Spindle Speed: 410 RPM
Feed Rate: .0062" per revolution
Depth of Cut: .050" (radius)

  Material: 4140 steel tubing, annealed
Diameter of material: 3.466 inches
Lead angle: 45 degrees
Spindle speed: 80 RPM
Feed rate: .0078" per revolution
Depth of cut: .030" (radius), .060" (diameter)

 

© Copyright 2017 - Wimberley, Inc. - All Rights Reserved

  View Cart  items -